4.4. Configuring Static Routes with ip commands

If static routes are required, they can be added to the routing table by means of the ip route add command and removed using the ip route del command. · Use the ...

As a system administrator, you can configure static routes using the ip route command. To display the IP routing table, use the ip route command.

2024年3月21日 — Under Red Hat/Fedora Linux you can add a static route for eth0 network interface by editing /etc/sysconfig/network-scripts/route-eth0 file.

The following example shows how to add a static route to a system. The system is Router 2, the default router for the 172.20.1.0 network that is shown in Figure ...

2021年2月27日 — The easiest way to add a route on Linux is to use the “ip route add” command followed by the network address to be reached and the gateway to be used for this ...

2024年2月5日 — This guide offers a step-by-step approach to adding static routes on various Linux distributions, including the necessary commands and configuration file edits.

2024年6月28日 — The ip route add Linux command is used to add a static route to the routing table of a Linux Kernel.

1. Get Interface Name: Run an ifconfig or ip addr in order to grab the interface name, that you want to set the route traffic to go through.

2023年7月19日 — To add a new route, you can use the ip route add command. For instance, to add a route for the network 10.0.0.0/24 with the gateway 192.168.1.2, ...

2024年1月22日 — Adding a static route. The IP address, subnet mask (CIDR), and gateway are necessary prerequisite information before adding a static route.